2018 Cub Cadet PRO Z 154L EFI

On Sale $6,399.00*
Was $8,399.00
Blowout: Save $2,000.00 now until 12/31/2024
*Price does not include $75.00 in destination charges.

On Sale $6,399.00*
Was $8,399.00
Blowout: Save $2,000.00 now until 12/31/2024
*Price does not include $75.00 in destination charges.

Key Features

New/Used New
Availability In Stock
LocationAll Seasons Rental
Stock # Qty on Hand - 1
VIN qty on hand 1
Condition Excellent

Product Features

Description

Steering
  • Lap Bar / Steering Wheel Control: High Performance & Speed Control
  • Lap Bar / Steering Wheel Adjustment: 3/4 length padded bars w/tooless quick adjust dial
Chassis
  • Frame: Fully welded, full-legnth 12ga. channel frame with 14ga. reinforcements
  • ROPS: 2 in. x 2 in. quick-latch tool-less foldable 3 position
  • Front Axle / Yolks: 2 in. x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yolks
  • Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
Operation
  • Seat Type: High-back suspension with seat belt, adjustable arm rests and 6 in. seat travel
  • Rear Tires: 23 in. x 10.5 in. - 12 in. (Turf Master)
  • Cruise Control: N/A
  • Front Tires: 13 in. x 6.5 in. - 6 in. (smooth)
  • PTO Clutch: Warner Clutch - 125 ft lb.
  • Park Brake / Braking: Intergrated system in Lap Bars
  • Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
  • Safety Systems: Operator presence
  • Engine Start: Electric
Mower Deck
  • Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
  • Spindle Construction: 5 in. sealed cast aluminum housing (maintenance-free)
  • Discharge Chute: High-density, impact-resistant rubber
  • Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
  • Deck Material: Fully welded 10ga. (.135 in.) steel deck shell with reinforcements totaling .560 in.
  • Top Reinforcement(s): 2ga. (.250 in.) top plate
  • Bottom Reinforcement: 7ga. (.175 in.) steel
  • Cutting Height: 1 in. - 5 in.
  • Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
  • Spindle Covers: Steel - Tooless Quick Release
  • Deck Size/Type: 54 in. FABRICATED DECK
  • Side Construction: 5/16 in.(.313) steel on trim and discharge sides
  • Deck Height Adjustment: Hand Lever / 15 position / spring assist
  • Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
  • Deck Style/Construction: Floating, fabricated 10ga. (.135") steel shell (e-coated)
General
  • Cup Holder: Intergrated into Side Pod
  • Hour Meter: Standard electronic
Warranty
  • Warranty: 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Dimensions
  • Weight (approx): 1000 lb.
  • L / W / H with discharge chute UP and ROPs DOWN: 80 in. L x 56 in. W x 48 in. H
Engine & Drive System
  • Engine Type: Kohler Confidant EFI Closed Loop EZT-750
  • Horsepower / CC's: 27hp - 747cc
  • Ground Speed: 9.5mph fwd. / 4.5mph rev.
  • Transmission: 12cc Hydro-Gear® ZT 3400 with charge pumps
  • Fuel Capacity: Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening

Engine

Horse Power 27hp - 747cc
Engine Type Kohler Confidant EFI Closed Loop EZT-750

General

Transmission 12cc Hydro-Gear® ZT 3400 with charge pumps
Fuel Capacity Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening

Deck

Deck Size 54 in. FABRICATED DECK

Shopping Tools